Vanish Oxi Action Powder pink 900g

Product detailed description

Vanish Oxi Action stain remover powder removes stains after the first wash. It is effective on a wide range of stains. For maximum speed and effectiveness, pre-treat or soak the fabric.

• VANISH Oxi Action Universal Liquid Stain Remover works from the first wash
• Can effectively remove stains from both white and colored laundry
• VANISH Oxi Action stain remover penetrates deep into the fibers thanks to active oxygen molecules
• Does not contain chlorine-based bleaches, is gentle on your textiles
• Removes fresh and dried stubborn stains, works even at a water temperature of 30 °C
• Can be used to pre-wash stains, soak laundry or add directly to the washing machine

Use

Before washing:

• mix 10 g of powder with water max 40°C so that the water covers the powder, mix for 30 seconds
• Apply the mixture to the stain for a maximum of 5 minutes.
• Rub the stained area as needed.
• then wash the laundry as usual.

Soaking:

• add one scoop to 4 liters of water
• for white laundry 6 hours max
• for colored laundry 1h max
• After soaking, wash as usual or rinse thoroughly.

For best stain removal results, scrub the stain before rinsing.

Washing:

• add to the detergent drawer
• for stubborn and dried stains 1 scoop
• for common stains ½ scoop
• Add a maximum of one scoop to each wash.

1 measuring cup = 60 ml.

Recommendations for using Vanish Oxi Action:

Always follow the washing instructions on the garment or fabric care label. Before use, test the colour fastness by testing on a hidden area of the fabric. Rinse and allow to dry. After each use, re-cap and store Vanish in a cool, dry place. For best results, the process may need to be repeated. Do not use on carpets or wool, silk or leather. Do not use on painted or dyed surfaces - for example wood, metal, etc. Do not soak fabrics with metal snaps and zips or with fire-resistant finishes. Do not expose treated or soaked garments to direct heat or sunlight before washing or rinsing thoroughly. Do not contaminate the product in the container. Do not leave the solution in a closed container after mixing. Oxygen will continue to be released and pressure may build up inside the container, causing the solution to leak.

Composition

5% or more but less than 15% oxygen-based bleaching agents, non-ionic surfactants, less than 5% anionic surfactants, perfume, hydrogen peroxide, alcohols, C12-18, ethoxylated; alcohols, C12-16, ethoxylated; benzenesulfonic acid, C10-13-alkyl derivatives, sodium salts

Hazardous substances: hydrogen peroxide, alcohols, C12-14, ethoxylated, 8 EO, benzesulfonic acid, mono-C10-14-alkyl derivatives, sodium salts, alcohols, C12-16, ethoxylated, 3 EO.